>>413
At that time, periodicals issued by a NPO ( Non-Profit Organization ) related to a certain intractable disease were sent to the place from Toyoshima-ward of Tokyo.
一
A very harmful being called ‘酒乱・大西共産党’ was transferred from Sikoku (死国 or 尸国) to a place near to the suicidal spot to persistently give various damages to chosen targets.
Besides, it’s probable that those harmful reverberations called ‘Kodoku (蠱毒)’ which had been brought by the ‘酒乱・大西共産党’ affected the person who committed suicide.
In the meaning, this case is similar to a pattern likened as ‘the Merida ( in Mexico ) incident’ .
In the past, before present buildings were newly constructed, a telegraph pole made of wood had been placed for many years like a tree slantedly falling down because a disaster.
>>436>>437
Is it possible that electromagnetic fluids had been leaked out through the telegraph pole made of wood which was slantedly put on the position for a long period, those fluids remarkably gave influence on living beings around there ？
>>439
besides synthetic sounds were frequently heard and the serious Ekbom syndrome was included in unnatural biological influences as one of the harmful reverberations.
一
By the way, the Merida case is meaningful in following points.
・ Strong radioactivity was detected over a wide range around the site.
・ A semi-transparent being ( as a virtual moving figure ) was captured by a camera incorporated into the mobile phone.
From「Notes on Artificial Medical Materials」,
8.7 Methods to evaluate an artificial joint
60 years have passed since the first practical use of artificial joint ( in 2013 ).
Various artificial joints have been produced until now.
Developments of technology are making steady progress year by year, respective standards have settled to ensure safeties of various products.
At present, various standards ( mainly, ASTM, ISO, etc ) have been presented to ensure various conditions from a strength test of the main body of an artificial joint to materials to package it.
>>460
But, unfortunately, an artificial joint is rarely broken down due to conditions for use.
It’s very important to analyze such an unfortunate case and utilize analyzed results for newly producing an artificial joint.
Then, generally used technologies in the industrial field such as observation of fracture surface and investigation of material quality are utilized for analysis.
>>461
8.7-1 Standards for ways to evaluate an artificial joint
In general, respective standardization tests are set for respective parts and conditions to ensure safety of each artificial joint.
※ For instance, ISO ( International Organization for Standardization ), ASTM ( American Society for Testing & Materials )
And, respective artificial joints developed on these standards are practically used through some tests.
There are various standards for respective applied parts and respective materials for packaging.
>>462
In case of artificial hip joint, the stem is fixed with osteo-cement, fatigue tests are performed to the artificial hip joint on specific patterns.
Then, roughly, 230 〜 2300 N of load is applied to it, five millions 〜 ten millions times of fatigue test are carried out to ensure the safety.
Furthermore, the strength is checked through FEM ( Finite Element Method ) to consider the stress-distribution in designing an artificial joint.
According to those analyses through FEM , we can see cases in which stresses are applied to an inner part and a screw-hole.
>>463
8.7-2 Analyses of broken cases
Unfortunately, if the artificial joint is broken down in the middle of use, we must make clear the cause and utilize those obtained informations for developments of products in the future.
In general, terms shown in the table are analyzed to check an artificial joint.
Terms different from those terms are often analyzed dependently on conditions using it and other viewpoints.
※ Terms to be checked are shown in the table ( fig.2 ).
>>464
In this case, according to the withdrawn re-substituted artificial hip joint, the artificial hip joint was broken down from the screw-hole of the distal part.
Then, fractography is utilized to catch causes of breakdown.
First, macro-fractures are observed by an optical microscope, it’s possible to check types of breakdown ( fatigue fracture, impact breakdown, torsional rupture, etc ) and the running direction of each breakdown on radial patterns and beach-marks captured by it.
>>465
It’s possible to not only observe micro-fractures such as striation dimples and defects such as precipitative structures, voids but also estimate causes to break down materials & constructions and destruction processes with SEM ( Scanning Electron Microscope ).
※ A broken nail to fix a foot joint is shown in fig.4 .
>>466
Though such a nail is mainly used to fix the joint of a rheumatic patient, if an over-load is applied to the nail under insufficient bone adhesion, a fatigue fracture is caused on it.
According to this image, as it’s possible to clearly see patterns such as striation on the fracture, we can find out that it’s a kind of fatigue fracture together with stable crack growth.
Furthermore, it’s possible to estimate the loaded condition on the pattern of the start of the fracture and the area of the end-section of it.
>>468
Its oxidation degree of the section depends on the inserted position, an oxidized position has honeycomb structure.
Fig 5 ; oxidation degrees measured by FT-IR
In this figure, the vertical axis corresponds to the oxidation degree, the case shows high oxidation degree.
а
>>469
8.7-3 Recent ways to analyze ( in 2013 )
Several tens years have passed since the first clinical application of polyethylene materials to an artificial joint.
Those clinical applications and those results in material have remarkably been improved.
But, the distribution of working stresses has never been made clear yet.
一
>>470
Recently, JFE techno-research has measured the distribution of stresses over the surface of material with an infrared camera.
The infrared camera used at that time has 0.02 ℃ of temperature resolution, it’s possible to visualize distributions of defects and stresses by measuring surfaces of respective implants in testing strength with such a camera.
>>471
Such a camera is mainly used to analyze fatigue situations on the stem of an artificial hip joint and a spine cage.
In particular, it’s useful for checking the design for an artificial joint and more detailed analyses of an accidental case through reproduction tests.
>>474
It’s one of the subjects for analytic technologies in the future to produce a model nearer to an actual human body which has higher quality than the model of human body at present ( about 2013 ).
If bio-materials ( such as artificial joints ) which are nearer to living tissues are developed with such combinations of material technologies with analytic technologies, those products will contribute to improvement in QOL ( Quality Of Life ).
>>475
・ Conclusion
Recent rapid progress in technology have enabled various ways for analysis.
Owing to those progress, unknown parts have been made clear and it has been possible to measure an actual shape.
It’s desirable that such technologies for measurement are effectively applied to respective medical devices including artificial joints, they contribute to improvement in QOL.
>>250
‘Hemi-Sync (≒ hemi-synchronization)’ proposed by Robert.Monroe means that a subtle difference (≒ disagreement) between respective sounds given through both ears is interpreted as the ‘third’ sound in some organ.
・ a positive ion (＝ a cat-ion)
・ a quantum superposition ( overlapping ) of a living state (≒ a non-equilibrium state) with a dead state (≒ an equilibrium state) 〜 Schrödinger’s cat
・ Cheshire-cat ; a being which is completely independent of gravity
・ A pollution-caused disease called Minamata-disease was publicly recognized through a following rumor as one of the clues.
‘I saw a tottering cat around here’
Besides, it’s probable that bad influences called Kodoku (蠱毒) brought through an obscure assassin such as 「酒乱・大西共産党 ( the Great Western Communist Party as a Hopeless Alcoholic )」have remarkably affected the fellows habitually pasting undesirable advertisements on the net so as to make them misbehave.
>>490
An addition ;
A severe woman as a supervisory role is often called ‘a dragon’.
Which is cuter, the girl kneading dough ( >>58 ) or the girl playing a role as Otohime ( at that time )？
By the way, Gorbachev had likened R.W.Reagan to a dinosaur in the past.
>>491
But, according to some uncertain informations,
astonishingly, I heard that the girl who played a role as Otohime was actually a boy like a girl.
Ⅴ
( 1 ) If a cat held on one’s back at an optional height is released to the floor,
the cat will get to the floor at a normal pose with twisting one’s body.
( 2 ) Here, it’s assumed that a position at an optional height corresponds to one polarizing plate, meanwhile the floor corresponds to another polarizing plate.
>>493
Then, a movement of luminosity through liquid crystal molecules packed into a gap between two polarizing plates is similar to the above motion of a cat in mechanism.
Ⅰ
>>378
By the way, we also heard that the people habitually and intentionally making e×plosive and noisy sounds with vehicles in Japan would fight against the world as their enemies.
「酒乱・大西共産党」also was categorized into such the annoying people.
>>505
＞ habitually and intentionally making e×plosive and noisy sounds with vehicles in Japan
これは、日本の「街宣右翼」の特徴でもある。
「右翼が、’ダサい’ ‘カッコ悪い’」と印象づけられたのは、彼らの振る舞いによるところが大きい。
一方、「日本人はスケベで変態」との印象は、日本語圏のネット全体に貼りつけられているスケベ広告やその手のサイトのせいでもある。
何者かが、「悪印象をつけるために、盛んに印象操作をしている」ことは疑いない。
>>410
ここの 13 号室に (現在) 入居している者 (部屋に居る時は、常に大音量でTV をかけている) は常に咳払いをしているが、何故か「酒乱・大西共産党 ( the great western communist party as a hopeless alcoholic )」という隠語で呼ばれる、四国 AND/OR 死国 から 北◯道の某地域に擦りつけられた、アルコール依存者とよく似ている。 似た者同士は声や行動パターンまで似てくるのか⁈
